No products in the cart.
Brand, Ecera, Sample Concentrator
DC150-1A 96-hole Sample Concentrator
DC150-1A is a high-precision control instrument that combines microcomputer and PID. Working principle: the nitrogen can be blowed onto the surface of the heated samples and then set the heating temperature to achieve rapid concentration of a large number of samples.
$110.00 – $589.00
Compare
Product Features:
1. Blowing each sample independently, not cause cross-contamination
2. The gas flow can be adjusted
3. Each blow needle can be controlled
4. The gas needle corresponds vertically to the hole, which is intuitive and convenient to adjust.
5. High temperature accuracy, wide temperature range and convenient temperature calibration
6. Protection device, accurate positioning, safe use
The Basic Parameters:
| Type
Parameter |
DC150-1A (96-hole) |
| Temp. Range | R.T+5℃~150℃ |
| Heating Time | ≤30min (20℃ to 150℃) |
| Temperature Control Discrepancy@40℃ | ≤±0.3℃ |
| Temperature Control Discrepancy@100℃ | ≤±0.5℃ |
| Temperature Control Discrepancy@120℃ | ≤±1℃ |
| Quantity | 1 |
| Time | 0~99h59m |
| Nitrogen Flow | 0~10L/m |
| Pressure | ≤0.5MPa |
| Power | 400W |
| Dimension(L×W×H) (mm) | 220×290×540mm |
| Insert Blocks | Block Form |
Insert Block:
| Type | Tube Diameter | Quantity | Dimension (mm) |
| D17 | 0.2ml Centrifuge tube | 96 | 153×96.5×33.5 |
| D18 | Flat | 96-hole Elisa Plate | 153×96.5×22.5 |
Related products
-
Brand, Ecera, Shaker/Mixer/Rocker
MIX-2500 Mini Vortex Mixer
MIX-2500 Mini Vortex Mixer
Product overview
Mix-2500 is widely used in life science, physical and chemical analysis fields, for vigorous re-suspension of cells or chemical pellets. It is suitable for 0.2-50ml microtubes and test tubes or small containers less than 108mm in diameter.
SKU: n/a -
Brand, Ecera, Shaker/Mixer/Rocker
Mix-S Mini Vortex Mixer
Mix-S Mini Vortex Mixer
Product overview
Mix-S lab vortex mixer is a test tube oscillator focusing on point motion. It is suitable for shaking and mixing of various reagents, solutions, chemicals and other samples, especially suitable for samples from small vessels (up to 50ml centrifugal tube). The instrument is suitable for small laboratories. It is mainly used in the fields of medicine, bioengineering, chemical laboratory, biochemical laboratory, factory laboratory, hospital laboratory, medicine and so on. There is no pollution and influence on the samples.
SKU: n/a -
Brand, Dry Bath Incubator, Ecera
MiniH-100L Digital Dry Bath (Cover)
MiniH-100L Digital Dry Bath (Cover)
Product overview
It’s designed with PCR hot lid that prevents evaporation MiniH-100L Digital Dry Bath (Cover) is thermostatic dry bath that is controlled by a microcomputer and can be applied to a vehicle power supply. It’s small, light and easy to move. It’s designed with PCR hot lid that prevents evaporation.
SKU: n/a -
Brand, Dry Bath Incubator, Ecera
WZ80-2 Microplate Thermostatic Oscillator
WZ80-2 Microplate Thermostatic Oscillator
Product overview
WZ80-2 is a microplate incubator formed by micro-processing technology combined with PID. It can oscillate the samples and easy to operate. It is mainly used for mixing or incubating cells at appropriate temperature in the solution of enzyme label plate (96/384 holes plate) and cell culture plate (24/48/96 holes plate, etc.).
SKU: n/a
