, ,

DC150-1 Sample Concentrator


DC150-1 is a high-precision control instrument that combines microcomputer and PID. Working principle: the nitrogen can be blowed onto the surface of the heated samples and then set the heating temperature to achieve rapid concentration of a large number of samples.

$80.00$615.00

Compare

Product Features:

1. Blowing each sample independently, not cause cross-contamination

2. The gas flow can be adjusted

3. Each blow needle can be controlled

4. The gas needle corresponds vertically to the hole position, which is intuitive and convenient to adjust.

5. High temperature accuracy, wide temperature range and convenient temperature calibration

6. Protection device, accurate positioning, safe use

The Basic Parameters:

             Type

Parameter

DC150-1 DC150-2
Temp. Range R.T.+5℃—150℃
Heating Time ≤30min (20℃ to 150℃)
Temperature   Control Discrepancy@40℃ ±0.3℃
Temperature   Control Discrepancy@100℃ ±0.5℃
Temperature   Control Discrepancy@120℃ ±1℃
Quantity 1 2
Time 0-99h59m
Nitrogen Flow 0—10L/m
Pressure ≤0.5MPa
Power 200W 400W
Dimension(L×W×H) (mm) 220×290×540
Insert Blocks Block Form

Insert Block: 

Type Tube Diameter Quantity Dimension (mm)
D1A 6 mm 12 96.5×76.5×50
D2A 7 mm 12 96.5×76.5×50
D3A 10 mm 12 96.5×76.5×50
D4A 12 mm 12 96.5×76.5×50
D5A 13 mm 12 96.5×76.5×50
D6 15 mm 12 96.5×76.5×50
D7 16 mm 12 96.5×76.5×50
D8 19 mm 12 96.5×76.5×50
D9 20 mm 12 96.5×76.5×50
D10 26 mm 8 96.5×76.5×50
D11 28 mm 6 96.5×76.5×50
D12 40 mm 3 96.5×76.5×50
D13A 0.5   ml Centrifuge tube 12 96.5×76.5×50
D14A 1.5   ml Centrifuge tube 12 96.5×76.5×50
D15A 2.0   ml Centrifuge tube 12 96.5×76.5×50
D16A 0.2ml 12 96.5×76.5×50
D19 Customized

D1A-D16A(1).jpg

error: Content is protected !!