DC150-2 Sample Concentrator
DC150-2 is a high-precision control instrument that combines microcomputer and PID. Working principle: the nitrogen can be blowed onto the surface of the heated samples and then set the heating temperature to achieve rapid concentration of a large number of samples.
$80.00 – $665.00
Compare
Product Features:
1. Blowing each sample independently, not cause cross-contamination
2. The gas flow can be adjusted
3. Each blow needle can be controlled
4. The gas needle corresponds vertically to the hole position, which is intuitive and convenient to adjust.
5. High temperature accuracy, wide temperature range and convenient temperature calibration
6. Protection device, accurate positioning, safe use
The Basic Parameters:
| Type
Parameter |
DC150-1 | DC150-2 |
| Temp. Range | R.T.+5℃—150℃ | |
| Heating Time | ≤30min (20℃ to150℃) | |
| Temperature Control Discrepancy@40℃ | ≤±0.3℃ | |
| Temperature Control Discrepancy@100℃ | ≤±0.5℃ | |
| Temperature Control Discrepancy@120℃ | ≤±1℃ | |
| Quantity | 1 | 2 |
| Time | 0-99h59m | |
| Nitrogen Flow | 0—10L/m | |
| Pressure | ≤0.5MPa | |
| Power | 200W | 400W |
| Dimension(L×W×H) (mm) | 220×290×540 | |
| Insert Blocks | Block Form | |
Insert Block:
| Type | Tube Diameter | Quantity | Dimension (mm) |
| D1A | 6 mm | 12 | 96.5×76.5×50 |
| D2A | 7 mm | 12 | 96.5×76.5×50 |
| D3A | 10 mm | 12 | 96.5×76.5×50 |
| D4A | 12 mm | 12 | 96.5×76.5×50 |
| D5A | 13 mm | 12 | 96.5×76.5×50 |
| D6 | 15 mm | 12 | 96.5×76.5×50 |
| D7 | 16 mm | 12 | 96.5×76.5×50 |
| D8 | 19 mm | 12 | 96.5×76.5×50 |
| D9 | 20 mm | 12 | 96.5×76.5×50 |
| D10 | 26 mm | 8 | 96.5×76.5×50 |
| D11 | 28 mm | 6 | 96.5×76.5×50 |
| D12 | 40 mm | 3 | 96.5×76.5×50 |
| D13A | 0.5 ml Centrifuge tube | 12 | 96.5×76.5×50 |
| D14A | 1.5 ml Centrifuge tube | 12 | 96.5×76.5×50 |
| D15A | 2.0 ml Centrifuge tube | 12 | 96.5×76.5×50 |
| D16A | 0.2ml | 12 | 96.5×76.5×50 |
| D19 | Customized | ||
Related products
-
Brand, Dry Bath Incubator, Ecera
MiniC-100 Mini Dry Bath Incubator (Cooling)
MiniC-100 Mini Dry Bath Incubator (Cooling)
Product overview
Minic-100 is thermostatic mini dry bath that is controlled by a microcomputer and can be applied to a vehicle power supply. It’s small, light and easy to move. It is especially suitable for use in the wild and in crowded experimental environments.
SKU: n/a -
Brand, Ecera, Shaker/Mixer/Rocker
CS-100 Orbital Shakers
CS-100Orbital Shakers – without platform
CS-100 series of orbital shakers are versatile, and the gentle oscillations are suitable for a variety of mixing tasks in different fields. It uses DC brushless motor technology and microcomputer control technology to mix and match various common flasks, petri dishes and beakers by changing different trays. It is easy to operate and is suitable for fields such as biology, microbiology and medical analysis.
SKU: n/a -
Brand, Dry Bath Incubator, Ecera
GC-100 Cooling Dry Bath Incubator
GC-100 Cooling Dry Bath Incubator
Product overview
GC-100 is a precision temperature device that uses semiconductor refrigeration technology for DC. It perfectly applies refrigeration and heating, which greatly shortens the time of experimental operation. It can be widely used in samples cultivation, preservation and reaction. It has multi-purpose functions such as heating and custom programs to meet the needs of different users.
SKU: n/a -
Brand, Ecera, Shaker/Mixer/Rocker
Mix-S Mini Vortex Mixer
Mix-S Mini Vortex Mixer
Product overview
Mix-S lab vortex mixer is a test tube oscillator focusing on point motion. It is suitable for shaking and mixing of various reagents, solutions, chemicals and other samples, especially suitable for samples from small vessels (up to 50ml centrifugal tube). The instrument is suitable for small laboratories. It is mainly used in the fields of medicine, bioengineering, chemical laboratory, biochemical laboratory, factory laboratory, hospital laboratory, medicine and so on. There is no pollution and influence on the samples.
SKU: n/a
