• Stainless steel housing.
• keypad controls running speed, reversible direction, start/stop, full speed, easy operation.
• Four digits LED indicator displays working speed.
• Brushless motor drive, maintenance free.
• Stainless steel housing, easy to clean, excellent resistance to corrosion of the acid,alkali, sodium and organic solvents.
• The circuit board with conformal coating makes it dust-proof and moisture-proof.
• External on/off voltage signal controls start/stop, reversible direction and easy dispensing function, optically coupled isolator. External analog signal adjusts the rotating speed.
• With RS485 MODBUS interface, easy to be controlled by external devices.

Specifications

• Flow range (mL/min): 0.4-13 L/min
• Speed range (rpm): 30-600
• Speed resolution (rpm): 1 rpm.
• Flow accuracy: 3%
• Power supply: AC 220V ± 10% 50Hz/60Hz; AC 110V ± 10% 50Hz/60Hz
• Power consumption: < 300W
• External control: Input level 5V, 12V (standard), 24V (optional)
• Communication interface: RS485 MODBUS interface
• Operating condition: Temperature 0~40°C; Relative humidity < 80%
• IP grade: IP31
• Dimensions (L x W x H): 340 x 235 x 175 mm (13.4 x 9.3 x 6.9 inch)
• Weight: 13 kg (28.7 lbs)

WG600S Applicable Pump Heads and Tubings, Flow Parameters

Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually it is effected by specific factors such as pressure, medium, etc. Above for reference only.

• Four digits LED indicator displays working speed.
• The LED indicator shows the working mode: internal control, external control or footswitch.
• Membrane keypad operation.
• Reversible direction, start/stop, adjust speed and full speed, state memory (power-off memory).
• Easy dispensing functions, it can repeat timing quantitative fluid dispensing.
• Can drive multi-channels and various types of pump heads.
• Stainless steel housing, easy to clean, excellent resistance to the corrosion of the acid ,alkali ,sodium and the organic solvents.
• The circuit board with conformal coating makes it dust-proof and moisture-proof.
• Super anti-interference feature, wide input voltage range, acceptable for the complex power environment.
• External high –low electrical level controls the start/stop, reversible direction and easy dispensing function, optically coupled isolator; external analog adjusts the rotate speed.
• RS485 interface, MODBUS protocol is available ,easy to connect with external device.
• Optional footswitch or timer for dispensing fluid.

Specifications

• Flow range: 3-6000 mL/min
• Speed range: 30-600 rpm
• Speed resolution: 1 rpm
• Flow accuracy: 3%
• Power supply: AC 180-264V 50Hz/60Hz (standard); AC 90-132V 50Hz/60Hz (optional)
• Power consumption: <200W
• External on/off control voltage: 5V, 12V (standard), 24V (optional); External control analog signal: 0-5V (standard), 0-10V, 4-20mA (optional)
• Communication interface: RS485 MODBUS
• Operating condition: 0~40 °C
• Relative humidity: < 80%
• IP grade: IP31
• Dimensions (L x W x H): 286mm x 180mm x 230mm (11.3 inch x 7.1 inch x 9.1 inch)
• Weight: 6.2kg (13.9 lbs)

WT600S Applicable Pump Heads and Tubings, Flow Parameters

Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually it is effected by specific factors such as pressure, medium, etc. Above for reference only.

• LCD displays rotating speed and working mode.
• Membrane keypad.
• Reversible direction, start/stop control and adjustable speed.
• Time dispense mode: automatically dispense by setting the duration for each dose, lag time between doses and number of cycles.
• 0.5% high precision rotating speed control with 0.1 rpm speed resolution when speed is between 0-100 rpm, 1 rpm speed resolution when speed is between 100-600 rpm.
• External logic level signal can control start/stop, direction and dispense functions; external analog signal can adjust the rotating speed. Signal is optically isolated.
• With RS485 MODBUS interface, easy to communicate with external device.
• Internal double-layer isolation structure; circuit board with conformal coating makes the pump dust-proof and moisture proof.
• Anti-electromagnetic interference feature, wide input voltage range for complex power environment.
• Stainless steel enclosure, easy to clean, resistant to the corrosion of the acid, alkali, sodium and organic solvents.

Specifications

• Flow range: 0.0001-720 mL/min
• Speed range: 0.1-150 rpm
• Speed resolution: 0.1-100 rpm, 0.1 rpm resolution; 100-150 rpm, 1 rpm resolution
• Speed accuracy: 0.2%
• Power supply: AC 100-240V,50Hz/60Hz
• Power consumption: < 40W
• External logic level control signal: 5V, 12V (standard), 24V (optional).
• External analog control signal: 0-5V (standard); 0-10V, 4-20mA (optional)
• Communication interface: RS485 MODBUS
• Operating condition: Temperature 0~40°C; Relative humidity <80%
• IP grade: IP31
• Dimensions (L x W x H): 264 x 150 x 270 mm (10.39 x 5.91 x 10.63 inch)
• Weight: 4.9 kg (10.4 lbs)

BT100S Suitable Pump Heads and Tubing, Flow Parameters

Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually it is effected by specific factors such as pressure, medium, etc. Above for reference only.

Functions and Features

• Color LCD display, touch screen and keypad for operating.
• Reversible direction, start/stop control and adjustable speed.
• Flow rate calibration.
• Flow rate display and control; Cumulative dispense volume display.
• Anti-drip function ensures dispense accuracy.
• 0.2% high precision rotating speed control with 0.1 rpm speed resolution.
• Precise motor control technology improves dispense accuracy compared to the traditional dispense mode.
• Professional operating system, configure system with setup wizard.
• Intelligent temperature control to minimize working noise.
• Logic level signal can control start/stop, direction and easy dispense functions; external analog signal can adjust the rotating speed. Control signal is optically isolated.
• With RS485 MODBUS interface, easy to communicate with external device.
• Internal double-layer isolation structure; circuit board with conformal coating makes the pump dust-proof and moisture proof.
• Anti-electromagnetic interference feature, wide input voltage range for complex power environment.
• ABS plastic housing, streamlined shape.
• Drive multi-channels and various types of pump heads.
• Optional footswitch and remote infrared control.

Specifications

• Flow range: 0.0001-720 mL/min
• Speed range: 0.1-150 rpm
• Speed resolution: 0.1rpm
• Speed accuracy: 0.2%
• Power supply: AC100-240V 50Hz/60Hz
• Power consumption: < 30W
• External logic level control signal: 5V, 12V (standard), 24V (optional)
• External analog control signal: 0-5V (standard), 0-10v, 4-20mA (optional)
• Communication interface: RS485 MODBUS interface
• Operating condition: Temperature 0-40 °C; Relative humidity < 80%
• IP grade: IP31
• Dimensions (L x W x H): 257 x 198 x 197mm (10.12 x 7.80 x 7.17 inch)
• Weight: 4.5 kg (10.6 lbs)

BT101L Suitable Pump Heads and Tubing, Flow Parameters

Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually it is effected by specific factors such as pressure, medium, etc. Above for reference only.

Functions and Features

• 4.3-inch color LCD display, intuitive image
• Touch screen with key operation, convenient and fast
• LF-Touch-OS software system, efficient and stable, with good human-computer interaction mode, convenient product customization and upgrade
• Four working modes, flow rate, time dispensing, volume dispensing, programming dispensing (cycle)
• Five sets of dispensing parameters for volume and time dispensing pre-storage
• Programming mode supports 30 different quantitative parameter settings for complex control processes
• Reversible direction, start/stop, full speed, suction function, timed start-stop
• Accurate flow control and display, microstep algorithm to ensure the dispensing accuracy of different settings
• Wizard flow calibration function, easy to use
• Unique back suction function to prevent liquid drips
• Support for serial print parameters and data
• Intelligent temperature control function, automatically adjusting the heat according to the environment, so that the device is always in the best state
• External analog adjust speed , external control start-stop ,reversible direction, dispensing, external signal physical isolation
• RS485 communication interface, MODBUS protocol is available, can set up communication parameters, convenient to connect various of control equipments
• Open multiple control parameters , suitable for OEM custom applications
• The circuit board is sprayed with three anti paint technology to achieve the effect of dustproof and moisture-proof
• Super anti-interference feature, wide input voltage range, acceptable for the complex power environment
• Innovative stainless steel housing, easy to clean, effectively prevent the erosion of various organic solvents

Specifications

• Flow range: 0.006-2900 mL/min
• Speed range: 0.1-600 rpm
• Speed resolution: 0.1 rpm
• Speed accuracy: 0.2%
• Dispensing volume: 0.05mL～9999L
• Dispensing time: 1～9999，“0”Infinite cycle
• Dispensing interval time: 0.1～999.9 S/Min/H, time unit adjustable
• Power supply:AC100～240V，50Hz/60Hz
• Power consumption: <60W
• External logic level control signal: 5V, 12V (standard), 24V (optional)
• External analog control signal: 0-5V (standard), 0-10v, 4-20mA (optional)
• Communication interface: MODBUS RS485
• Operating condition: Temperature 0-40°C; Relative humidity <80%
• IP grade: IP31
• Dimensions （L×W×H）260mm×161mm×186mm(10.2 x 6.3 x 7.3 inch)
• Weight: 5.2 kg ( 11.5 lbs)

BT600F Suitable Pump Heads and Tubing, Flow parameters

Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually it is effected by specific factors such as pressure, medium, etc. Above for reference only.

 Functions and Features

• Simple operation, portable size, easy to install. Suitable for equipment as an ancillary device and for laboratory use.
• 0.5% high precision rotating speed control with 0.1 rpm speed resolution. Speed range 0.1-80 rpm.
• The lifetime of the built-in Pharmed BPT tubing is up to 12000 hours for continuous running.
• Four-digit LED displays working speed and control mode.
• Membrane keypad.
• Reversible direction, start/stop, adjustable speed.
• Time dispense function. Repeat dispensing by setting the dispense duration time.
• Plastic housing, embedded design to work independently.
• The circuit board with conformal coating makes it dust-proof and moisture-proof.
• External logic level signal can control start/stop, direction and dispense function. External analog signal can adjust the rotating speed. Signal is optically isolated.
• MODBUS RS485 interface, easy to communicate with external control devices.
• Optional footswitch or timer for dispensing fluid.

Specifications

• Flow range: 0.004-77 mL/min
• Speed range: 0.1-80 rpm
• Speed accuracy: 0.5%
• Speed resolution: 0.1 rpm
• Power supply: AC 100-240V, 50Hz/60Hz
• Power consumption: < 10W
• External logic level control signal: 5V, 12V (standard), 24V (optional)
• External analog control signal: 0-5V (standard); 0-10V, 4-20mA (optional)
• External communication interface: MODBUS RS485
• Ambient temperature: 0-40 °C
• Relative humidity: < 80%
• IP grade: IP31
• Dimensions (L x W x H): 135mm x 96mm x 96mm (4.4 x 3.8 x 3.8 inch)
• Weight: 0.8 kg (1.8 lbs)

BQ80S Suitable pump heads and tubing, flow parameters

Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually it is effected by specific factors such as pressure, medium, etc. Above for reference only.